|
楼主 |
发表于 2011-2-21 09:11:16
|
显示全部楼层
busy
进水的话一般情况下并不容易真的死掉,包括笔记本电脑。用报纸或者厨房用大纸巾,包好,放入冰箱,冷藏层就行,放2-3天。记得把电池拿出来。
谢谢,我的GPS正在冰箱里干燥,如果不行的话,会接Garmin回信中的方法再试试,再不行的话就买新的了,Garmin GPS过了保修期维修起来很贵不如买新的了...
Dear Gloria,
Thank you for contacting Garmin International.
I suggest taking out any Micro SD card and attempting to start the unit.
If this works, then the card will need to be reformatted or replaced.
If your unit will still not power on, some or all of the operating
software may be missing from its memory. The unit has a Boot-Block
function that will allow WebUpdater to see the unit, despite this, and
reinstall its software.
WebUpdater is a free download that will check for and install software
updates without using your Internet web browser. Download the WebUpdater
for Windows here: http://www8.garmin.com/support/download_details.jsp?id=931
or for Mac here: https://buy.garmin.com/shop/stor ... p;&pID=9566
Following are instructions on how to perform the Boot-Block on your
unit:
1. Connect the Unit to a computer
2. Please press and hold the thumb pad Up*
3. Press and hold POWER for 5 seconds, release, and continue holding UP.
4. Run WebUpdater and the unit should be recognized as if it were
powered on
*IMPORTANT: You must hold UP until loading of the software has
completed! If the button is released at any point prior, such as during
the LOADER screen, the update will fail.
This may take a few attempts before it is successful. If this does not
work, the Garmin will need to come in for service. For customers in
Canada to avoid custom and duty fees we suggest that they contact
Raytech, our service center in Canada. You will need to contact Raytech
to determine turn around time or availability on accessories.
The following link is the form you will need to fill out, print, and
ship along with the GPS for the repair:
https://www.raytech.ca/?page=login&r=returnForm
If the unit is under warranty, attach proof of purchase to the form when
shipping the receiver to Raytech.
***: The thumb pad is the large circular
pad on the face of the unit with 4 triangle on it. Press the triangle
that points towards the top of the device. Then, while holding that
button, press and hold the power button for 5 seconds, then release, but
continue to hold up. You will want to then run the Webupdater
Please let us know if you have further questions.
With Best Regards,
Drew G
Product Support Specialist
2nd Shift Outdoor/Fitness Team
Garmin International
913-397-8200
800-800-1020
913-440-8280 (fax) Att: Drew G, Associate #6972
www.garmin.com |
|